Technical speifications -STARLIGHT Italians Nightwish

STARLIGHT has Audio/Light Service and its own technical staff. These data sheets must be taken into consideration if the organization of the event wants to make its own audio service available. They contain a list of the equipment and optimal conditions necessary for the performance of the show. Failure to comply with the group's technical requirements may jeopardize the outcome of the show, or even cause it to be cancelled. It is therefore the task of the event organizer to ensure that the material available meets the requirements in time and, in any case, it is advisable to contact the management of the band via the CONTACTS form for any modification and/or downsizing of the structures.
For indoor performances contact the management for agreements.

TECHNICAL SHEET AND STAGE LAYOUT 2023

Brands and models of microphones and effects apply as a guideline and may be replaced by the audio service with other equivalent features and qualities.
The organizer is responsible for setting up a 3x3mt gazebo in the Back Stage 1/2, covered by walls on each side and insulated from the floor with clean carpeting. Inside, a table, a mirror and 4 chairs will have to be provided, as well as a light that allows good visibility.

GENERAL INDICATIONS

Will have to offer musicians a useful space of at least 20 meters x 10 meters, without holes, dips, disconnections or obstacles of any kind. A footboard is required for the battery, as long as it is no smaller than 4m x 3m and a height not exceeding 40cm and a footboard for keyboards no smaller than 3m x 2m and a height not exceeding 40cm. Each metal structure must be regularly connected to a valid grounding.

THOSE INDICATED IN THIS SHEET ARE THE OPTIMAL MEASUREMENTS OF A STAGE FOR LARGE EVENTS,

both of the American ring and of the amplification boxes. It is necessary to set up a stage with the indicated measurements at a variable distance from 20 to 30 meters from the stage in a frontal/central position for the audio/lighting technical staff. It is very important to respect the heights of both the truss and the roof.
Any changes/resizes must be agreed in advance with the technical staff.
Any variation / downsizing must be previously agreed with the technical staff.